Notifications
Clear all
Topic starter
26/08/2022 8:43 am
I have a problem with the new UPS Plco HV4.0 (UPS Plco HV3.0 ist not available).
The firmware update 0x0133 is done and I have access to all registers, the board is also running. So far so well.
But after powerup the LED SYS is lighting continuously, that means the board is waiting for the RaspberryPi (I suppose so).
Unfortunately the manual is under progress, so I hope you can give me some hints to solve the problem.
Thank you.
03/09/2022 6:47 pm
Hi,
The continuously lighting SYS LED means that the Daemon is nor working properly or the Raspberry Pi is not running. The simples way is to run pico_i2c.py from a command line to see the results i.e.
sudo python pico_i2c.py
if after this command LED start blinking, then you made mistake during daemon installation. This part is very detailed described in the manual.
Keep me informed
BR Pi Master
Topic starter
05/09/2022 1:12 pm
Firmware Update 12.06.2022
UPS PIco HV4.0 New Firmware, Manual, Bootloader V0.3A released Version 0133_12062022. Click here to download everything.
My interpretation of everything was wrong. So I used the file pico_v0.3a.py also for daemon.
Please add the files pico_i2c2.py and pico_i2c3.py for daemon from update 10.05.2022.
