Dual In-Line Package Raspberry Pi Pico
Rapid Prototyping Raspberry Pi Pico Stack-Able Boards
no cables – no solder – no lost time
DiP-Pi WiFi Master FAQ
This is our second DiP-Pi based on the same PCB of DiP-Pi PIoT and is covering the most critical parts needed of the Raspberry Pi PICO wireless communication developments. They are: • Powered via Raspberry Pi USB socket • ON/OFF slide switch functionality on all Powering Sources (including Raspberry Pi PICO USB powering) • RESET Button • WiFi networking • Embedded Micro SD card interface • Embedded 1-wire interface • Embedded DHT-11/22 Humidity/Temperature Interface • Plenty of informative LEDs • Plenty of ready-to-use micro python and C examples.
The DiP-Pi WiFi Master is powered through the Raspberry Pi PICO micro–USB Plug.
You can switch the system ON/OFF using Slide Switch placed on the DiP-Pi WiFi Master. This switch will also put to OFF the Raspberry Pi PICO even if it is still connected to the micro–USB Plug (by using the 3V3_EN).
Yes, you can use the ON/OFF Slide Switch as a Boot Mode initiator. This will save you from the very unhandy process of removing the micro–USB Plug from the Raspberry Pi PICO.
Yes, obviously.
The DiP-Pi WiFi Master is a subset of the DiP-Pi PIoT so the only missing pars are the related to the powering. You still have SD Card Interface, DHT-11/22 and 1-wire.