Raspberry Pi 4 Model B/2GB Combo Offer 2

92.35 

ID: PM_190

COMBO OFFER 2 – Raspberry Pi 4 Model B/2GB with UPS PIco HV4.0B/C Stack and PIco FAN Kit HV4.0

Description

Raspberry Pi 4 Model B/2GB Combo Offer 2

Raspberry Pi 4 Model B/2GB /4GB /8GB
with
UPS PIco HV4.0B/C Stack
and
PIco Fan Kit HV4.0

 

Short System Overview

UPS PIco HV4.0B/C Stack is an Ultimate Powering System HAT that adds a wealth of innovative powerful and development features to the Raspberry Pi® microcomputer! It has been designed especially for the Raspberry Pi® 4, and taking into account all enhanced power and cooling requirement of the Raspberry Pi® 4 models, however in addition it is still compatible with all former Raspberry Pi models. The core functionality of the UPS PIco HV4.0B/C Stack is to protect and automatically shut-down your Raspberry Pi if there is a cable power failure and can be set to automatically monitor and reboot your Pi once cable power has been restored! However, it is only a small part of plenty and powerful functionalities that are implement on this small HAT. 

For more information about UPS PIco HV4.0B/C Stack klick here

Short System Overview for Raspberry Pi 4 Model B/2GB/4GB/8GB

Processor: Broadcom 2711, Quad-core Cortex-A72 64-bit SoC @ 1.5GHz
Memory: 2GB / 4GB / 8GB

Connectivity:

 

2.4GHz / 5.0GHz IEEE 802.11.b/g/n/ac wireless LAN
Bluetooth 5.0, BLE
2 x USB 2.0 / 2 x USB 3.0 ports
True Gigabit Ethernet
GPIO: Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
Video: 2 x micro HDMI, 4K video

Multimedia:

 

H.265 decode (4kp60)
H.264 decode (1080p60)

H.264 encode(1080p30)
OpenGL ES 1.1, 2.0, 3.0 graphics
Input Power: 5V/3A DC via USB type C connector
Environment: Operating temperature 0–50ºC

System Overview for PIco FAN Kit HV4.0

The PIco FAN Kit HV4.0 is an Advanced Active Cooling System for the Raspberry Pi ® that can be easy installed on the UPS PIco. It is suitable for all Raspberry Pi®4 Model B users whose board reaches a high temperature, for whatever reason.  There is no need for any additional cabling or Power Supply, as the PIco FAN is directly powered and controlled via UPS PIco supervising circuits. A small hand work is needed in order to install the PIco FAN, screw on the PIco FAN to the UPS PIco board, as also connect it to the UPS PIco board. All required parts are included in the kit.

Thanks to the Special Air Distribution Slots on the UPS PIco PCB , the PIco FAN cools not only the microprocessor on the Raspberry Pi® board but all the heat-generating devices, as well as the whole Raspberry Pi PCB and UPS PIco.

The PIco FAN is very low profile, placed on the UPS PIco bottom side.