Raspberry Pi 4 Model B/2GB Combo Offer 3

118.50 

ID: PM_190

Raspberry Pi 4 Model B/2GB with UPS PIco HV4.0B/C PPoE and Terminals Block PCB HV4.0

Description

Raspberry Pi 4 Model B/2GB Combo Offer 3

Raspberry Pi 4 Model B/2GB /4GB /8GB
with UPS PIco HV4.0B/C PPoE and Terminals Block PCB HV4.0

 

Short System Overview for UPS PIco HV4.0B/C PPoE

UPS PIco HV4.0B/C PPoE is an Ultimate Power Management System HAT that adds a wealth of innovative powerful and development features to the Raspberry Pi® microcomputer! It has been designed especially for the Raspberry Pi® 4, and taking into account all enhanced power and cooling requirement of the Raspberry Pi® 4 models, however in addition it is still compatible with all former Raspberry Pi models. The core functionality of the UPS PIco HV4.0B/C PPoE is to power, protect and automatically shut-down your Raspberry Pi if there is a cable power failure and can be set to automatically monitor and reboot your Pi once cable power has been restored! However, it is only a small part of plenty and powerful functionalities that are implement on this small HAT. Due to its design, allows to power your Raspberry Pi® directly via PoE Pins and offer low cost solution of Passive PoE of 24V. In addition both powering inputs can be used at the same time GPIO 5V and PPoE. Independent of Passive PoE of 24V cable powering input, there is additional EPR 5.5-28V DC power input capability. One of them (PoE of 24V or EPR 5.5-28V) should be choose.

For more information about UPS PIco HV4.0B/C PPoE – Click here

Short System Overview for Raspberry Pi 4 Model B/2GB/4GB/8GB

Processor: Broadcom 2711, Quad-core Cortex-A72 64-bit SoC @ 1.5GHz
Memory: 2GB / 4GB / 8GB

Connectivity:

 

2.4GHz / 5.0GHz IEEE 802.11.b/g/n/ac wireless LAN
Bluetooth 5.0, BLE
2 x USB 2.0 / 2 x USB 3.0 ports
True Gigabit Ethernet
GPIO: Standard 40-pin GPIO header (fully backwards-compatible with previous boards)
Video: 2 x micro HDMI, 4K video

Multimedia:

 

H.265 decode (4kp60)
H.264 decode (1080p60)

H.264 encode(1080p30)
OpenGL ES 1.1, 2.0, 3.0 graphics
Input Power: 5V/3A DC via USB type C connector
Environment: Operating temperature 0–50ºC

System Overview for Terminals Block PCB HV4.0

The Terminals Block PCB HV4.0 is an advanced Terminals Block PCB that adds a wealth of extra functionality and development features to the innovative UPS PIco HV4.0!