Description

PIco Fan Kit HV4.0

The PIco FAN Kit HV4.0 is an Advanced Active Cooling System for the Raspberry Pi ® that can be easy installed on the UPS PIco. It is suitable for all Raspberry Pi®4 Model B users whose board reaches a high temperature, for whatever reason.  There is no need for any additional cabling or Power Supply, as the PIco FAN is directly powered and controlled via UPS PIco supervising circuits. A small hand work is needed in order to install the PIco FAN, screw on the PIco FAN to the UPS PIco board, as also connect it to the UPS PIco board. All required parts are included in the kit.

Thanks to the Special Air Distribution Slots on the UPS PIco PCB , the PIco FAN cools not only the microprocessor on the Raspberry Pi® board but all the heat-generating devices, as well as the whole Raspberry Pi PCB and UPS PIco. 

Kit Contents:

1. Micro Fan with cable
2. Set of 3 pcs of tree screws required for PIco FAN mounting UPS PIco PCB
3. Set of 4 pcs of plastic washers required for the PIco FAN mounting UPS PIco PCB
4. 2mm PCB connector for the FAN

Case Fitment

The PIco FAN is very low profile, placed on the UPS PIco bottom side.