Description

UPS PIco HV3.0 Terminals Block PCB

The UPS PIco HV3.0 Terminals Block PCB is an advanced Terminals Block PCB that adds a wealth of extra functionality and development features to the innovative UPS PIco HV3.0!

The following listed features are offered by the UPS PIco HV3.0 Terminals Block PCB:

• Terminals Block Connectivity on Independent from Raspberry Pi, and battery backed-up 3.3 V 150mA supply (available also when Raspberry Pi is not powered)
• Terminal Block Connectivity on ESD protected 1-wire interface (at 3.3V)
• Terminal Block Connectivity on Independent from Raspberry Pi and battery backed-up 5V source 750 mA (available also when Raspberry Pi is not powered)
• 12V RS232 Interface Level Converter connectable to the Raspberry Pi Primary Serial Port or Independent Secondary Serial Port offered by UPS PIco HV3.0A with Terminal Block Connectivity
• Terminal Block Connectivity on Auxiliary interface to the bi-stable (zero power) Relay offered by the UPS PIco HV3.0A
• Terminal Block Connectivity on Optical Isolated Interface – readable as digital or analog input offered by the UPS PIco HV3.0A
• Terminal Block Connectivity on ESD Protected 12 bit A/D converters pre-scaled to: 5V, 10V (user selectable) accessed by I²C on Raspberry Pi®
• Voltage Follower and scaled of 0 – 4.8V A/D with Terminal Block Connectivity (with very high input impedance)

Kit Contents:

• Terminals Block PCB itself
• Set of 4 pcs spacers (5mm), can be used as 2x10mm, depending to user/case installation
• Set of 2 pcs nuts
• Set of 3 Jumpers

Case Fitment

The Terminals Block PCB can be used without any case, with Standard UPS PIco HV3.0 Plexi cut Case as also with Offical Raspberry Pi Case. The terminals Block PCB is compatible with all UPS PIco HV3.0 models.