Last seen: Oct 8, 2025
@ryf Hi,The former HAT one must be working. We have extremely low number of faulty boards. If it is not working please send me your postal address,...
@s3000 Hi, Yes to all ! Hope next week to release it What firmware do you have ? BR PiM
Hi, yes, I see the green is working the blue not Must be a bug, checking and back to you soon BR PiM GREEN_LED_MAP.mp4
Hi, For the Raspberry Pi 3 and for Raspberry Pi 4 THERE ARE NOT NEEDED they are existing in teh Raspberry Pi PCB. If we will be using then in add...
@ryf Hi, The most possible is that it is good. You must be doing something wrong. Are you available today to work together, again. If for any...
@ryf Hi, You do not need these resistors. They are existing already on the Raspberry Pi PCB. BR PiM
@ryf If you have PIco alone without any other hardware ? Or both together ? Please advise BR PiM
@ryf Hi, Yes, I see Let me think and answer tomorrow. Very impossible to have it broken Where are you located physically BR PiM
Hi, I made a simple test of mapping and it is working well See attachment. sudo i2cset -y 1 0x6b 0x18 0x01 (0b00000001) Mapping of System SYS L...
Hi, I will answer in details tomorrow evening, after setting of the workbench. My Best Regards Ioannis
@s3000 Hi, 🙂 www.ccsinfo.com PCD version The most compact and fastest, even better that Microchip. We have the full one, but a...
Hi, I will try to answer as much a s possible. It is ready a long time already, just adding and adding new features before release it. We wa...
@ryf Hi, Yes, your firmware is very old. However as it is a vital part of the system, it was implemented and working from the beginning. Yes, Ple...
Hi, As I said, tested now and it is working well. On every change we have a LEDs information to the user, called "walking led" that means lighting L...
@ryf After reboot, this register must be 0x00. Normally the PIco should re-boot itself after that command, and flashing 3 times with LEDs. The pr...