Last seen: Nov 24, 2024
@christian-schietzel Hi, Than you for the information! If you not connected anything else (i.e. high voltage PoE, instead of PPoE) diodes are f...
Hi, Lets go step by step. OK. That is fine. Means your system is working OK. Means the MOSFET switches are working properly. Yes. The P...
Hi, What I understand is that you are loosing the interaction between UPS PIco HV4.0 and Raspberry Pi. Please confirm you are running the Daemon o...
Hi, Please describe me in much more details your case, in order to answer Thank you BR Pi Master
Hi, "That's what you get when you have clumsy fingers" you are not alone Please keep us informed about results here as it is knowledge base for e...
@carlo "i broke the sd slot" my congratulation 😉 The system (daemon) must be installed on device that is booting your RPi, therefore if you made...
Hi, You can power your system via "USB C" and "PPoE" at the same time. There is protection for this. However you need to make sure that there is n...
@eighty2fifty1 Hi, Release already newer version BR Pi Master
@andycianci please run it again, newer version. I will ask Vit about this possible bug. Many thanks to Vit for this perfect piece of software done...
@andycianci Hi I check it and answer on Monday. However we already wrote a new handler for the serial Port(s) so rather release them also on M...
@xani Hi, Yes it is JST connector 2.5mm. BR Pi Master
@eighty2fifty1 Hi, Yes, you are right. It was a bug. Corrected now. Please download the latest version of the firmware, we corrected this bug as...
Hi, I will do it during this weekend. However it is clearly written in the package. In example you have been asked about relay. It is written in th...
Hi, A new version of manual and firmware is already ready. However we delay little bit the release for few days, as doing extensive testing. We will ...