PiAdmin
@piadmin
Admin
Member
Joined: Jun 18, 2019
Last seen: May 6, 2024
Topics: 2 / Replies: 79
Reply
RE: PPOE is not working !

Hi, Please send it back without battery. As usual, I will add something extra parts when sending to you so in reality shipping will be free for you....

2 years ago
Reply
RE: PPOE is not working !

@christian-schietzel Hi, Yes, seem to be short circuit You must be entered a huge voltage (much more than allowed) and burned protection...

2 years ago
Reply
RE: UPS PIco HV4.0B Stack can no longer be accessed via i2c

Hi, Do this described below directly form the manual. Be carefully the command line for BL is slightly different than before. The Hand Bootloader ...

2 years ago
Reply
RE: UPS PIco HV4.0B Stack can no longer be accessed via i2c

Hi, You definitely not destroy your device. Bootloader is in protected part of memory. However a very detailed step by step procedure will provide...

2 years ago
Reply
RE: PPOE is not working !

@christian-schietzel OK BR Pi Master

2 years ago
Reply
RE: PPOE is not working !

Hi, Yes, you need to remove the PIco to see if the 24 V DC arriving to these pins. Just to measure it. You do not need to have PIco to make suc...

2 years ago
Reply
RE: PPOE is not working !

Hi, hmmm There is enough space, we are mounting this FAN for customers in many many PIco, but OK it is not a big problem, if covering your nee...

2 years ago
Reply
RE: PPOE is not working !

@christian-schietzel Hi, Than you for the information! If you not connected anything else (i.e. high voltage PoE, instead of PPoE) diodes are f...

2 years ago
Reply
RE: PPOE is not working !

Hi, Lets go step by step. OK. That is fine. Means your system is working OK. Means the MOSFET switches are working properly. Yes. The P...

2 years ago
Reply
RE: connection keeps dropping

Hi, What I understand is that you are loosing the interaction between UPS PIco HV4.0 and Raspberry Pi. Please confirm you are running the Daemon o...

2 years ago
Reply
RE: connection keeps dropping

Hi, Please describe me in much more details your case, in order to answer Thank you BR Pi Master

2 years ago
Reply
RE: manual for UPS PIco HV4.0B/C PPoE

Hi, "That's what you get when you have clumsy fingers" you are not alone Please keep us informed about results here as it is knowledge base for e...

2 years ago
Reply
RE: manual for UPS PIco HV4.0B/C PPoE

@carlo "i broke the sd slot" my congratulation 😉 The system (daemon) must be installed on device that is booting your RPi, therefore if you made...

2 years ago
Reply
RE: manual for UPS PIco HV4.0B/C PPoE

Hi, You can power your system via "USB C" and "PPoE" at the same time. There is protection for this. However you need to make sure that there is n...

2 years ago
Reply
RE: UPS not starting rPi when powered via EXT until FSSD button is pressed

@xani Hi, OK. I check it and if needed correct it in the ongoing new version of firmware, that is planned to be released within next days BR Pi...

2 years ago
Page 3 / 6